Product ID:EPK 615, HARDENER
MSDS Date:03/07/1996
FSC:8040
NIIN:01-137-8418
Kit Part:Y
MSDS Number: CFQXX

DEXTER CORP

ONE DEXTER DR
SEABROOK, NH 03874
US

Emergency Phone: 800-424-9300

Info Phone: 603-474-5541

Cage: 57294

DIVERSITY WATER TECHNOLOGIES INC

200 CHAGRIN FALLS, OH 44022 US

Telephone: 216-247-5000

Cage: 57294

CALCIUM CARBONATE; (MAGNESIUM SILICATE HYDRATE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9495

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 34.550%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9495

PHENOL,2,4,6-TRIS (DIMETHYLAMINOMETHYL);

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: 1-5%

OSHA PEL N/K

ACGIH TLV: N/K

MERCAPTAN TERMINATED POLYMER

Fraction By Weight: 30-60%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:PRLNG OVEREXP TO FREE SILICA
DUST, (UNCOMBINED SILICON DIOXIDE) ABOVE THE TLV SPECIFIED ABOVE
MAY CAUSE SCARRING OF THE LUNGS W/COUGHING & SHORTNESS OF BRTH. A
DELAYED LUNG INJURY, SILICOSIS, MA Y RESULT FROM BRTHG FREE SILICA.
SILICOSIS IS A FORM OF DISABLING PROGRESSIVE & SOMETIMES FATAL
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLING-QUARTZ:IARC MONO,
VOL 68, 1997:GROUP 1A. NTP 7TH ANNUAL RPT ON CARCIN. 1994:ANTIC TO
BE CARCIN.
Effects of Overexposure:HLTH HAZ:PLUM FIBROSIS CHARACTERIZED BY THE
PRESENCE OF TYPICAL NODULATION IN THE LUNGS. HOT VAPS MAY IRRIT THE
RESP TRACT. EYES:LIQ CONTACT WILL CAUSE SEV IRRIT & POSS CORNEAL
DMG. SKIN:IS SEVERELY I RRIT CAUSING PERSISTENT LESIONS. MATL IS
ALLERGENIC CAUSING A SENSIT DERM. MATL CAN BE ABSORBED THRU SKIN.
(SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. EYE & SKIN CONTACT-FLUSH
EYES W/PLENTY OF H*2O FOR AT LEAST 15 MIN & GET PROMPT MED ATTN;
WASH SKIN THORO W/SOAP & H*2O; REMOVE & WASH CLTHG BEFORE REUSE.
INGEST:IF SW ALLOWED DILUTE BY GIVING H*2O TO DRINK & CALL A MD.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. NOTES TO MD:IT MAY
NOT BE ADVISABLE TO INDUCE VOMIT IF SEV DMG TO THE DIGESTIVE TRACT
HAS OCCURRED.

Flash Point Method:OC
Flash Point:215F,102C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, "ALCOHOL" FOAM, OR
CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . USE
H*2O TO KEEP FIRE-EXPOSED CNTNRS COOL. WATER SPRAY MAY BE USED TO
FLUSH SPILLS AWAY FROM EXPOS & (SUPDAT)
Unusual Fire/Explosion Hazard:CARE MUST BE TAKEN TO PREVENT IGNITION
WHEN PROCESSING OR HANDLING AT TEMPERATURES ABOVE THE FLASH POINT.

Spill Release Procedures:SEE WASTE DISPOSAL METHOD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROTECT FROM PHYSICAL DAMAGE. STORE IN
COOL, DRY WELL VENTILATED AREA AWAY FROM ANY ACUTE FIRE HAZARD.
Other Precautions:STRONG SKIN SENSITIZER. AVOID SKIN CONTACT.

Respiratory Protection:WHERE COMPARATIVELY SMALL AMOUNTS ARE BEING
USED, VENTILATION SHOULD MOVE AIR OVER THE WORK AND AWAY FROM THE
WORKER. DO NOT RECIRCULATE UNLESS SCRUBBED WITH ACID.
Ventilation:VENTILATION SHOULD MOVE AIR OVER THE WORK AREA AND AWAY
FROM THE WORKER.
Protective Gloves:PLASTIC OR RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . USE OF PROTECTIVE SKIN CREAM IS RECOMMENDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:TO DILUTE SPILLS TO NONFLAMMABLE MIXTURE. EFTS OF
OVEREXP:THIS MATERIAL IS RATED A HIGH HEALTH HAZARD DUE TO CORNEAL
DAMAGE AND SEVERE SKIN IRRITATION.

Boiling Pt:B.P. Text:404F,207C
Vapor Pres:<1
Vapor Density:3.5
Spec Gravity:1.65
Solubility in Water:PARTIAL
Appearance and Odor:TAN, HIGH VISCOSITY LIQUID STRONG AMMONIA-LIKE ODOR
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH STRONG ACIDS.
Stability Condition to Avoid:DO NOT MIX LARGE BATCHES OF EPOXY RESIN
AND DTA WITHOUT RECOGNITION OF DEVELOPMENT OF EXOTHERMIC HEAT.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
HYDROGEN CYANIDE, NITROGEN OXIDES, CARBON MONOXIDE AND CARBON
DIOXIDE.

Waste Disposal Methods:STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED
OR SPILLED - CLEANUP AND DISPOSAL SHOULD BE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.