Product ID:CPS238011 ULTRA-DUTY GREASE EP NLGI 2
MSDS Date:07/22/1993
FSC:9150
NIIN:00F039049
MSDS Number: CFBQF

CHEVRON USA PRODUCTS CO

575 MARKET STREET
SAN FRANCISCO, CA 94105-2856
US

Emergency Phone: 510-842-5952

Info Phone: 800-582-3835

Cage: 81230

CHEVRON USA INC DBA CHEVRON PRODUCTS CO

WALNUT CREEK, CA 94598 US

Telephone: 510-977-7283

Cage: 04BH0

ADDITIVES

Fraction By Weight: <20%

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY

CAS: 64741-88-4

RTECS: PY8040500

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

PETROLEUM DISTILLATE - STREIGHT RUN MIDDLE (HUMAN

CAS: 64741-89-5

RTECS: PY8041500

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY

CAS: 64741-96-4

RTECS: PY8040000

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINE LIGHT

CAS: 64741-97-5

RTECS: PY8041000

OSHA PEL 5 MG/CUM (MIST)

ACGIH TLV: 5 MG/CUM (MIST)

SOLVENT-REFINED RESIDUUM, REFINED PETROLEUM OILS *97-3*

CAS: 64742-01-4

PETROLEUM OIL, HYDROTREATED HEAVY NAPHTHENIC DISTILLATE

CAS: 64742-52-5

RTECS: PY8035001

LIGHT NAPHTHALIC DISTILLATE, HYDROTREATED LIGHT NAPHTHENIC

CAS: 64742-53-6

RTECS: PY8036000

SOLVENT REFINED HYDROTREATED HEAVY PARAFFINIC DISTILLATE,

CAS: 64742-54-7

RTECS: PY8035500

OSHA PEL 5 MG/CUM (MIST)

PETROLEUM HYDROCARBONS, SOLVENT DEWAXED RESIDUAL OIL

CAS: 64742-62-7

OIL PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY PARAFFINIC

CAS: 64742-65-0

RTECS: PY8038500

LITHIUM BASE THICKENER

Fraction By Weight: <10%

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:THIS SUBSTANCE CAN BE ABSORBED THROUGH
THE SKIN. ACCIDENTAL HIGH-VELOCITY INJECTION UNDER THE SKIN OF THIS
MATERIAL MAY RESULT IN SERIOUS INJURY. IF LEFT UNTREATED, A WOUND
OF THIS TYPE COULD RESULT I N MUCH SWELLING, DISCOLORATION &
INTENSE THROBBING PAIN & EVENTUAL DISFIGUREMENT/AMPUTATION OF THE
AFFECTED PART.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:THIS SUBSTANCE CAN BE ABSORBED THROUGH THE
SKIN. ACCIDENTAL HIGH-VELOCITY INJECTION UNDER THE SKIN OF THIS
MATERIAL MAY RESULT IN SERIOUS INJURY. IF LEFT UNTREATED, A WOUND
OF THIS TYPE COULD RESULT I N MUCH SWELLING, DISCOLORATION &
INTENSE THROBBING PAIN & EVENTUAL DISFIGUREMENT/AMPUTATION OF THE
AFFECTED AREA.

First Aid:EYES: FLUSH W/FRESH WATER FOR 15 MINS. REMOVE CONTACT LENSES
IF WORN. SKIN: WASH THOROUGHLY W/SOAP & WATER. INGESTION: GIVE
WATER/MILK TO DRINK. CONSULT MEDICAL PERSONNEL BEFORE INDUCING
VOMITING. OBT AIN MEDICAL ATTENTION IN ALL CASES. NOTE TO
PHYSICIAN: MATERIAL CAN BE INJECTED UNDER SKIN W/HIGH-PRESSURE
EQUIPMENT RESULTING IN A SMALL, SOMETIMES BLOODLESS PUNCTURE WOUND.
(SEE SUPP DATA)

Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG
Fire Fighting Procedures:DON'T ENTER ANY ENCLOSED/CONFINED SPACE W/OUT
PROPER PROTECTIVE EQUIPMENT INCLUDING SCBA.
Unusual Fire/Explosion Hazard:RESIDUE MAY IGNITE W/EXPLOSIVE VIOLENCE
IF HEATED SUFFICIENTLY. DRUM MAY RUPTURE W/EXCESSIVE FORCE IF
EMPTIED W/PRESSURE.

Spill Release Procedures:CLEAN UP IMMEDIATELY, OBSERVING ALL PERSONAL
PROTECTION & EXPOSURE PRECAUTIONS.

Handling and Storage Precautions:DON'T USE PRESSURE TO EMPTY DRUM.
Other Precautions:DON'T WELD, HEAT/DRILL CONTAINER. AVOID
PROLONGED/FREQUENTLY REPEATED SKIN CONTACT.

Respiratory Protection:IF OPERATING CONDITIONS CREATE HIGH AIRBORNE
CONCENTRATIONS, THE USE OF AN APPROVED RESPIRATOR IS RECOMMENDED.
Ventilation:ADEQUATE TO KEEP THE AIRBORNE CONCENTRATIONS OF THIS
MATERIAL BELOW THE RECOMMENDED EXPOSURE STANDARD.
Eye Protection:NONE USUALLY NECESSARY
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE & LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
FIRST AID: INJECTED MATERIAL CAN BE DEPOSITED DEEPLY.

Solubility in Water:INSOLUBLE
Appearance and Odor:RED GREASE

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS CHLORATES, NITRATES, PEROXIDES
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CO2, OXIDES OF
SULFUR, NITROGEN & PHOSPHOROUS. INCOMPLETE COMBUSTION CAN PRODUCE
CO.

Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
CONTAINERS & DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.