Product ID:97-149 PITT GUARD COMP B
MSDS Date:09/04/1991
FSC:8040
NIIN:00F045566
MSDS Number: BYLTM

PPG INDUSTRIES INC COATINGS & RESINS GROUP

4325 ROSANNA DR
ALLISON PARK, PA 15101-5000
US

Emergency Phone: 304-843-1300/412-492-5555

Info Phone: 412-492-5555/216-572-6111

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 60-65%

SILICON DIOXIDE, CELITE 322, AMORPHOUS SILICA GEL *95-4*

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 30-35%

OSHA PEL 80 MG/CUM

ACGIH TLV: 0.2 MG/CUM

NITROETHANE

CAS: 79-24-3

RTECS: KI5600000

Fraction By Weight: 2-5%

OSHA PEL 310 MG/CUM

ACGIH TLV: 307 MG/CUM

XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *95-4*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <1%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SILICON DIOXIDE, CRYSTALLINE QUARTZ, SAND (ANIMAL CARC,

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 30-35%

OSHA PEL 0.1 MG/CUM RESP DUST

ACGIH TLV: 0.1 MG/CUM RESP DUST

RHEOLOGICAL ADDITIVE CAS NO. 71011-27-3

Fraction By Weight: 2-5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES:
IRRITATION. SKIN: IRRITATION & ABSORPTION. INHALATION: HARMFUL.
IRRITATES EYES, NOSE & THROAT. MAY CAUSE IRRITATION OF THE
RESPIRATORY SYSTEM & PERMANENT BRAIN & NERVOU S SYSTEM DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, EYE WATERING, HEADACHES, NAUSEA,
DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS, CRACKING, BURNING,
SWELLING.

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH IMMEDIATELY W/PLENTY OF
WATER FOLLOWED BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. GIVE CPR & OTHER SUPPORTIVE MEASURES AS REQUIRED.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:85F
Lower Limits:3.4
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, MAY BE USED TO
COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP. IF WATER IS
USED, FOG NOZZLES ARE PREFERABLE. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DON'T APPLY ON HOT SURFACES. TOXIC GASES
MAY FORM WHEN PRODUCT IS CONTACTED BY FLAME/HOT SURFACES.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER PROTECTION SHOULD BE PERMITTED IN THE AREA.
REMOVE SOURCES OF IGNITION. TAKE UP MATERIAL W/SAWDUST,
VERMICULITE/OTHER ABSORBENT MATERIAL & PLACE INTO CONTAINERS FOR
DISPOSAL.

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDING DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IC FLAMMABLE LIQUIDS.
Other Precautions:CONTAINER SHOULD BE GROUNDED WHEN POURING. AVOID FREE
FALL OF LIQUIDS IN EXCESS OF A FEW INCHES.

Respiratory Protection:USE NIOSH/MSHA APPROVED (TC-23C-) PAINT
SPRAY/AIR SUPPLIED (TC-19C-) RESPIRATORS MAY ALSO REDUCE EXPOSURE.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP CONCENTRATION <
EXPOSURE LIMITS.
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:IMPERMEABLE CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
BOILING POINT: 280.4-395.6F.

Boiling Pt:B.P. Text:(SEE SUPP)
Vapor Pres:14.1
Vapor Density:>1
Spec Gravity:1.39
Evaporation Rate & Reference:(BUO AC = 100): 11
Solubility in Water:0.1%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS
Percent Volatiles by Volume:5.6

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
FLAMES.
Hazardous Decomposition Products:FUMES, CO

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY. WASTE MATERIAL MUST
BE DISPOSED OF IAW/FEDERAL, STATE & LOCAL REGULATIONS. PAINT,
FLAMMABLE LIQUID UN1263 .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.