Product ID:WEAR-O-MATIC SUPER WH
MSDS Date:04/26/1988
FSC:3439
NIIN:00F028566
MSDS Number: BRTQG

ALLOY RODS CORP

1500 KAREN LN
HANOVER, PA 17331
US

Emergency Phone: 717-637-8911

Info Phone: 717-637-8911

Cage: GO230

ESAB GROUP INC

517 HANOVER, PA 17331 US

Telephone: 717-637-8911 OR 800-933-7070

Cage: 84021

MANGANESE, MN COMPOUNDS

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/CUM (CEILING)

ACGIH TLV: 0.5 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/CUM

ACGIH TLV: 0.05 MG/CUM IC

CHROMIUM CARBIDE *93-1*

CAS: 12012-35-0

OSHA PEL 1 MG/CUM

ACGIH TLV: 0.5 MG/CUM

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 5 MG/CUM

ACGIH TLV: 10 MG/CUM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF NOSE, THROAT, EYES. MAY
LEAD TO SIDEROSIS WHICH MAY AFFECT PULMONARY FUNCTION. ARC RAYS CAN
INJURE EYES & BURN SKIN. ELECTRIC SHOCK CAN KILL. SEE SUPP.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, IRRITATION OF
NOSE OR THROAT. EYES: IRRITATION. SKIN: DRYNESS & BURNS.

First Aid:EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED
CROSS. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NON-FLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES.

Handling and Storage Precautions:KEEP HEAD OUT OF FUMES, DON'T TOUCH
LIVE ELECTRICAL PARTS, INSULATE FROM WORK AND GROUND.
Other Precautions:TO DETERMINE COMPOSITION & QUANTITY OF FUMES & GASES
TO WHICH WORKERS ARE EXPOSED IS TO TAKE AN AIR SAMPLE INSIDE THE
WELDERS HELMET OR IN THE WORKER'S BREATHING ZONE.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:LOCAL EXHAUST AT THE ARC TO KEEP THE FUMES & GASES BELOW
THE TLV.
Protective Gloves:WELDERS GLOVES
Eye Protection:FACE SHIELD W/APPROPRIATE FILTER LENS
Other Protective Equipment:HELMET, ARM PROTECTORS, APRONS, HATS,
SHOULDETION, DARK SUBSTANTIAL CLOTHING, SCREENS, FLASH GOGGLES.
Supplemental Safety and Health
THE PRODUCT AS SUPPLIED IS NON-HAZARDOUS. HEALTH HAZARDS OCCUR DURING
OPERATIONS. THE COMPOSITION & QUANTITY OF WELDING FUMES ARE
DEPENDENT ON THE PROCESS, PROCEDURES, MEDIA, CONTAMINENTS IN THE
ATMOS PHERE, & ELECTRODES USED.

Stability Indicator/Materials to Avoid:YES
SEE SUPP
Stability Condition to Avoid:SEE SUPP
Hazardous Decomposition Products:CO, CO2, OZONE & NITROGEN OXIDES
FORMED BY THE RADIATION FROM ARC. WELDING FUMES - COMPLEX OXIDES
FROM THE INGREDIENTS.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE, & L OCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.