Product ID:TEMPLATE EMULSIONS TYPE RC & WOS
MSDS Date:10/01/1989
FSC:6750
NIIN:00-472-8786
MSDS Number: BPXDR

ANITEC IMAGE CORP

40 CHARLES ST
BINGHAMTON, NY 13902
US

Emergency Phone: 607-774-3333

Info Phone: 800-234-7707

Cage: 61263

ANITEC IMAGE CORP

4444 BINGHAMTON, NY 13902 US

Telephone: 607-774-3333

Cage: 61263

GELATIN

Fraction By Weight: 10% %

SILVER HALIDES TO ALSO INCLUDE 7783-90-6 AND 7785-23-1

CAS: 7783-96-2

Fraction By Weight: 10% %

CADMIUM CHLORIDE (SARA III)

CAS: 10108-64-2

RTECS: EV0175000

Fraction By Weight: TRACE

OSHA PEL SEE 1910.1027

ACGIH TLV: 0.05 MG(CD)/M3; 9293

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

NON HAZARDOUS INGREDIENTS

Fraction By Weight: BALANCE

LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT CONTAINS SMALL AMOUNTS OF
A CADMIUM SALT AND MAY CAUSE LOCALIZED IRRITATION. CADMIUM HAS BEEN
DETERMINED TO BE A CARCINOGEN BASED ON SUBCATANEOUS ANIMAL LAB
STUDIES. CARE SHOULD BE TAKEN TO MINIMIZE EXPOSURE TO SOLUTIONS TO
WHICH THIS PRODUCT HAS BEEN PROCESSED.
Explanation of Carcinogenicity:CADMIUM HAS BEEN DETERMINED TO BE A
CARCINOGEN BY IARC PER MANUFACTURER.
Effects of Overexposure:SKIN IRRITATION, EYE IRRITATION, UPPER
RESPIRATORY TRACT IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE FROM SOURCE OF EXPOSURE. WASH AFFECTED AREAS
THOROUGHLY. IF IRRITATION OR OTHER CONDITIONS PERSIST, CONSULT A
PHYSICIAN.

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:WATER MIST, ALCOHOL FOAM, CARBON DIOXIDE, DRY
CHEMICAL
Fire Fighting Procedures:AVOID BREATHING COMBUSTIBLE FUMES
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:DISPOSE OF MATERIALS AS NOTED BELOW. UNEXPOSED
FILM MAY BE REPACKAGED FOR FUTURE USE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY PLACE, AWAY FROM
HEAT, RADIATION OR LIGHT SOURCES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:DISPOSABLE COTTON GLOVES
Eye Protection:NOT NORMALLY REQUIRED
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING FILM AND/OR FOLLOWING
EXPOSURE TO FILM PROCESSING SOLUTIONS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY GEL WITH NO DISTINGUISHING ODOR
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
DO NOT IMMERSE IN WATER OR CHEMICALS PRIOR TO PROCESSING.
Stability Condition to Avoid:AVOID EXPOSURE TO HEAT, LIGHT AND OTHER
RADIATION SOURCES EXCEPT AS NECESSARY TO PROCESS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSAL OF FILM AND FILM PROCESSING SOLUTIONS
SHOULD BE MADE IN CONFORMANCE WITH APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.