Product ID:2351 LOW MELTING ALLOYS
MSDS Date:02/21/1990
FSC:3439
NIIN:00-163-4346
MSDS Number: BLRDF

BELMONT METALS INC

330 BELMONT AVE
BROOKLYN, NY 11207

Emergency Phone: (718) 342-4900

Info Phone: (718) 342-4900

Preparer: BRUCE N. REED

Cage: 70774

BELMONT METALS INC

BROOKLYN, NY 11207

Telephone: 718-342-4900

Cage: 70774

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 35%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 30%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

Fraction By Weight: 35%

ACGIH TLV: 10 MG/CUM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO THE
RESPIRATORY SYSTEM. INGESTION: ABSORBED BY THE DIGESTIVE SYSTEM.
EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:LEAD IS A SUSPECTED HUMAN CARCINOGEN BY
ACGIH.
Effects of Overexposure:INHALATION: IRRITATION TO THE RESPIRATORY
SYSTEM. INGESTION: ABSORBED BY THE DIGESTIVE SYSTEM. SKIN/EYES:
IRRITATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/COPIOUS
QUANTITIES OF WATER. SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Extinguishing Media:SAND, DRY CHEMICAL, OR CO2. DON'T USE WATER ON FIRE
WHERE MOLTEN METAL IS PRESENT.
Fire Fighting Procedures:USE FULL BODY PROTECTIVE CLOTHING & FULL FACE
PIECE SELF-CONTAINED BREATHING APPARATUS OPERATED IN POSITIVE
PRESSURE MODE.

Spill Release Procedures:DUST MATERIAL SHOULD BE VACUUMED OR WET SWEPT
WHEN VACUUMING ISN'T FEASIBLE-PARTICULATE MATTER SHOULD BE STORED
IN DRY CONTAINERS FOR LATER DISPOSAL. DON'T USE COMPRESSED AIR AS A
MEANS OF CLEANING.

Handling and Storage Precautions:EMPLOYEE TRAINING PROGRAM MAY BE
REQUIRED. DON'T USE TOBACCO OR EAT FOOD IN WORK AREA. DON'T USE
COMPRESSED AIR.
Other Precautions:AVOID INGESTION OR INHALATION. PROVIDE SIGNS & LABELS
IN WORK AREAS & FOR CONTAMINATED CONTAINERS & EQUIPMENT.
GRINDING/SAWING/BUFFING CAN GENERATE AIRBORNE PARTICULATE IN THE
WORK AREA.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR FOR TOXIC
DUST & FUME.
Ventilation:LOCAL EXHAUST TO KEEP Protective Gloves:RECOMMENDED
Eye Protection:FACESHIELD OR VENTED GOGGLES
Other Protective Equipment:FULL PROTECTIVE CLOTHING, COVERALLS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINTED CLOTHING BEFORE
REUSE. WASH/SHOWER BEFORE EATING/SMOKING. PRACTICE GOOD
HOUSEKEEPING/HYGIENE.
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:117-500F
Spec Gravity:6.69-11.35
Appearance and Odor:GRAY METALLIC, ODORLESS

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:OVERHEATING
Hazardous Decomposition Products:TOXIC METAL FUMES, VAPORS, DUSTS, &
OXIDES

Waste Disposal Methods:DISPOSE OF TOXIC SUBSTANCES & HAZARDOUS WASTE IN
ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.