Product ID:QQ-S-571,SOLDER BAR
MSDS Date:01/01/1987
FSC:3439
NIIN:00-247-6921
MSDS Number: BDNNH

METAL-TECH ALLOYS,INC.

Emergency Phone: (203)753-8498

Cage: 1DV67

METAL-TECH ALLOYS INC

2472 WATERBURY, CT 06722 US

Telephone: 203-753-8498/FAX 3865 (MR. JUHASZ)

Cage: 1DV67

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 57.5%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 41.5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: <0.5%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <.08%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

CADMIUM (SARA III)

CAS: 7440-43-9

RTECS: EU9800000

Fraction By Weight: <0.3%

OSHA PEL SEE 1910.1027

ACGIH TLV: 0.01 MG/M3 DUST;9394

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Effects of Overexposure:INH:CHILLS,FEVER,METAL FUME FEVER WHICH COME A
FEW HOURS AFTER LARGE EXPOSURES.

First Aid:EYE:FLUSH W/COPIOUS AMOUNT OF WATER;SKIN:WASH WITH SOAP &
WATER;INHALE:REMOVE TO FRESH AIR,GIVE ARTIFICIAL RESPIRATION IF
NEEDED;ING:GIVE 1-2 GLASSES WATER/MILK.INDUCE VOMIT ONLY IF
CONSCIOUS & NOT CO NVULSE.SEE DR.IMM.;REMOVE CONTAM.CLOTH &
LAUNDER.

Extinguishing Media:SPECIAL MIXTURES OF DRY CHEM.SUITABLE FOR METAL
FIRES.
Fire Fighting Procedures:NONE SPECIFIED.
Unusual Fire/Explosion Hazard:METAL PROD.ARE NOT A FIRE
HAZ;HOWEVER,DUST GENERATED IN GRINDING OPERATION MAY PRESENT
FIRE/EXPL.HAZ

Spill Release Procedures:CLEAN UP USING METHODS W/AVOID DUST GENERATION
AND THE USE OF WATER,SUCH AS VACUUM.IF AIRBORNE DUST IS GENERATED
DURING THE CLEAN UP,USE AN APPROP.NIOSH APPVD.RESPIRATOR.

Handling and Storage Precautions:METAL ITSELF PRESENTS NO HEALTH
HAZ.UNLESS IT IS WELDED,BURNED,GROUND OR CUT.
Other Precautions:DURING
WELDING,BURNING,GROUNDING,CUTTING,EXCESS,AMOUNT OF FUMES/DUST MAY
BE GENERATED.IT IS ADVISED THAT YOUR PARTICULAR OPERATION BE
EVALUATED TO DETERMINE WHETHER OR NOT A HAZ.EXISTS.

Respiratory Protection:USE NIOSH APPVD RESP.IF TLV IS EXCEEDED.
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES.
Protective Gloves:WELDER'S GLOVES
Eye Protection:FACE SHIELD W/FILTR LENS.
Other Protective Equipment:SUBS.OK.CLOTH,ARM PROTECT,APRON,HAT,SHOULDR
PROTECT.
Supplemental Safety and Health
MSDS DATED 11-01-85/OTHER INGRED:ALUMINUM<0.005%;SILVER
0.01%;ZINC<0.005%;BISMUTH<0.25%;IRON<0.02%/

HCC:N1
Appearance and Odor:BAR 0.375 INX0.6875 INX13.5 IN

Stability Indicator/Materials to Avoid:YES
SEE CASE HISTORY 87047A
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:FUMES OF METALS&METAL OXIDES,INCLUDING
BASE METAL&COATING.

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FED REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.