BCQQQ - XPS41 ADHESIVE

  • MSDS: BCQQQ
  • Manufacturer: N P
  • Product Name: XPS41 ADHESIVE
  • National Stock Number: 8040-00N008592
Product Identification

Contractor
COLLINS & AIKMAN CORP
DALTON, GA 30720

Telephone: 404-259-9711

Cage: 2L469

Ingredients

PHENYLMERCURIC ACETATE (SARA III)

CAS: 62-38-4

RTECS: OV6475000

Fraction By Weight: <0.1%

OSHA PEL 0.1 MG HG/M3;CEIL;S

ACGIH TLV: 0.01 MG HG/M3; 9192

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <3%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)

CAS: 8002-05-9

RTECS: SE7449000

Fraction By Weight: <2%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 8990

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:HEADACHE,NAUSEA.EYES:EYE
IRRITATION-ACUTE
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHAL:NAUSEA,LIGHTHEADEDNESS,DROWSINESS,LOSS OF
COODINATION.EYES:IRRITATION.
Medical Cond Aggravated by Exposure:ANEMIA

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR.SKIN:WASH WITH SOAP &
WATER.EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.INGEST:CALL MD
IMMEDIATELY .

Fire Fighting

Flash Point Method:TOC
Flash Point:>200F,93.3C
Extinguishing Media:WATER,FOAM,DRY POWDER
Fire Fighting Procedures:USE NIOSH.MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:ABSORB IN CLAY,DIATOMACEOUS EARTH OR OTHER
NON-FLAMMABLE ABSORBANT.SCOOP INTO CONTAINERS AND ALLOWED TO DRY.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:AVOID EXCESSIVE HEAT
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN
Ventilation:LOCAL EXHAUST NOT NORMALLY REQUIRED.MECHANICAL (GENERAL)
2-3 CHANGES PER HOUR TO KEEP CONCENTRATION BELOW TLV.
Protective Gloves:NOT NORMALLY REQUIRED (SEE SUPP DATA)
Eye Protection:NOT REQUIRED
Other Protective Equipment:NONE
Work Hygienic Practices:WASH RESIDUE FROM SKIN WITH SOAP WATER.
Supplemental Safety and Health
PROT GLOVES:EXCEPT TO AVOID STICKEY HANDS.

Chemical Properties

Boiling Pt:B.P. Text:212-250F
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>1 (AIR=1)
Spec Gravity:N/K
Evaporation Rate & Reference:>1 (BUTYL ACETATE=1)
Solubility in Water:100%
Appearance and Odor:SOFT PASTE

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:N/K
Conditions to Avoid Polymerization:EXTREME HEAT

Disposal

Product ID:XPS41 ADHESIVE
MSDS Date:01/09/1986
FSC:8040
NIIN:00N008592
MSDS Number: BCQQQ

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.